Furnace Buying Tips
Choosing a
furnace for your Pennsylvania home is not difficult. The following list are
features that you may want to look for when buying your furnace. 1. What type of furnace do you want? Will it be Gas or Electric?
The Gas Furnace
The gas furnace is always more affordable to use than the electric furnace where
gas is readily available. On the downside, burning fuel generates fumes. In
well-maintained gas furnaces, the fumes generated are enclosed in the exchanger
and then exit the house through an exhaust vent.
Remember, a gas furnace must be checked by a
qualified furnace repair professional at least once a year. The professional
would check the furnace for holes, leaks or cracks. A break or crack in the
furnace lets carbon monoxide seep into your house or place of business.
The Electric Furnace
The electric furnace has a higher cost than a gas furnace. On the upside, since
electric furnaces do not use flames, it does not generate any carbon monoxide.
The electric furnace is cleaner and safer than a gas furnace.
2. The Quality of the Furnace
The quality of the furnace determines how long and how well it will perform.
Choosing a brand of furnace that has a history of quality and reliability can be
less costly in the long run. Ask your contractor about which brand will be
optimal for your needs. A free estimate for the purchase and installation are
available in some companies.
3. The Efficiency of the Furnace
The efficiency of gas furnaces are determined by the AFUE or Annual Fuel
Utilization Efficiency ratings. The AFUE ratings identifies how efficiently is
the fuel being consumed. In most cases, a higher AFUE rating means it takes less
fuel to heat your home.
Gas furnaces with higher ratings cost more than those with lower ratings but may
save you more money down the road. A minimum rating of 78% is established by the
government in 1992. Many furnaces have an efficiency rating of about 60% prior
to 1992.
a. The Mid-Efficiency Furnaces
The mid-efficiency furnaces are also called ‘induces draft furnaces’ or
‘non-condensing furnaces’. The mid-efficiency furnace offers the bare minimum of
78% efficiency up to about 80%.
b. The High-Efficiency Furnaces
The high-efficiency furnaces are also known as ‘condensing furnaces’ or ‘sealed
combustion furnaces’. The high-efficiency furnaces has an AFUE rating as high as
96%. Some furnaces use a two-stage valve and an efficient variable-speed motor
to raise comfort and effectiveness.
4. The Comfort features of furnaces
Several furnaces provide features that increases comfort and efficiency.
a. The features of the two-speed furnace
The furnace can function at low speed for most of the time. It allows for a more
quieter operation for a longer amount of time compared to a ‘single-speed
furnace’. The longer run periods allow for fewer start/stop cycles, less drafts,
and very little temperature variance.
The temperature swing is limited to about two degrees compared to the four
degree variance of the single-speed units. The two-speed unit gives better
circulation which prevents warmer air from rising and the cooler air from
settling down. The two-speed unit gives a more consistent temperature in the
house.
b. The features of variable-capacity furnaces
Furnaces with variable capacity provide a combination of efficiency and comfort.
The variable-capacity has a motor that regulates your needs by automatically
adjusting air volume and speed. The var-cap furnace provides the most efficient
heating and cooling.
A fan comes with the var-cap furnace. The fan will reduce your cost during
summer. If the fan is used throughout summer, the central air conditioning unit
increases in efficiency.
5. The furnace noise level
Unfortunately, all furnaces do not come with a standard rating system for
sound unlike heat pumps and air conditioners. Although, two-speed units and var-cap
units generally operate at a low noise levels.
The two-speed and var-cap furnaces run for longer periods and lower sounds than
the standard unit. Certain var-cap units has features that prevent ‘creaking’ of
the ducts due to expansion and contraction caused by changing temperature. The
temperature differential is reduced so that the creaking noise is also almost
eliminated.
If you are looking for a Montgomery County furnace repair
contractor, please call us today at 610.624.3605 or complete our online request form.
|  | What Homeowners Are Saying!  "We were really pleased with the professional manner in which all the men
conducted the entire process. They represented your company well, and we are very happy with the results." Haverford, PA Read more.
  Get some around the house tips from our monthly newsletter.
 We Accept The Following |
